|
|
|
|
|
|
|
|
 |
|
| |
 |
| Author |
Message |
justin200
New Member
 
Joined: 05 Feb 2016
Posts: 3
|
|
|
Fri Feb 05, 2016 8:39 am  |
I was in the kitchen. Had the cabinet at the top opened. I had bent down a bit, then stood back up and the top of my forehead hit the cabinet very hard. I also had noticed in that area of the cabinet, there is a small blade if you will... well not a blade but its metal. But besides that, rest is wood. I then took a look at the mirror and notice i have a scar there. Its about 3/4ths of an inch.
Its basically a diagonal scar and its right under where my hairline is in the middle. Thus in the middle and the top of my forehead. Does anyone have tips on what i should/should not do? I did use this Chinese lotion called Lion Lotion.
I also read bio oil is good for this? If so, i will buy it. So basically i just wash my face, then after it, just put that lion lotion on it at the moment. Is that fine? I'm sure most of you never heard of this lotion. I'm not sure if this is for that. But not really sure what to do. Its pretty noticeable. I want to make sure i don't make it worst. Should i just not put anything on it? I do know this takes time to heal etc so i want to make sure i don't do things to make it worst.
I also like to mention that i will see a dermatologist in a few days. But this was not the reason. Its for a few other reasons. But i would like to know if anyone here have any advice. I will ask the dermatologist this as well to see what he says.
Would like advice on this. |
|
|
|
|
| Wed Apr 24, 2024 4:09 pm |
If this is your first visit to the EDS Forums please take the time to register. Registration is required for you to post on the forums. Registration will also give you the ability to track messages of interest, send private messages to other users, participate in Gift Certificates draws and enjoy automatic discounts for shopping at our online store. Registration is free and takes just a few seconds to complete.
Click Here to join our community.
If you are already a registered member on the forums, please login to gain full access to the site. |
|
 |
|
|
|
