| Author |
Message |
|
|
|
Sat May 13, 2006 4:30 pm  |
I'm a newbie when it comes to posting, feel pretty silly having to ask this:
how do I add a quote or partial quote in a reply message?
Thanks in advance. |
|
|
|
|
|
Sat May 13, 2006 4:36 pm |
| Click QUOTE on right upper coner of the post and it'll bring you to "Post Reply" mode with the post quoted. It always copies the whole post and I have to delete the part I don't need. Maybe Mabsy knows how to do partial quote. |
_________________
53, DermaQuest, NCN Products, PMD, Dermarolling |
|
|
|
|
Sat May 13, 2006 4:58 pm |
| thank you! I felt foolish asking such a simple question. |
|
|
|
|
|
Sat May 13, 2006 5:21 pm |
| I did not know it until about 2 or 3 weeks ago. I did not feel foolish before I knew it. Should I??? |
_________________
53, DermaQuest, NCN Products, PMD, Dermarolling |
|
|
|
|
Sat May 13, 2006 6:19 pm |
I also did not know this til a couple of weeks ago. I used to copy paste the message that I wanted to quote and made the font smaller.
hahahahahaah |
|
|
|
|
|
Sat May 13, 2006 8:57 pm |
Ok, this is how I do it but unsure if it is correct...
From the 'post a reply' section, click the 'quote' button up the top, scroll down the page until you come to the message that you want to quote [the thread comes up underneath the typing box], copy the part you want to quote, paste into your typing box and click the quote button again. The word 'quote' as well as a beginning and end slash \/ will come up at the beginning and end of the quoted bit of you message.
Hope this makes sense
maddy |
|
|
Mabsy
Moderator
 
Joined: 17 Aug 2003
Posts: 9644
|
|
|
Sun May 14, 2006 1:12 am |
Here's how:
1. Identify the post that you would like to reply to and quote.
2. Instead of clicking on "reply" on this post, click "quote" (up in the top right corner of that post).
3. You will get a post writting box as you usually do but the original message will be embedded withing {quote} {/quote} tags (with different brackets though but they won't show up here if I type them).
4. Feel free to edit the message within those two tags (e.g. cut it down to just one sentence you want to quote rather than the whole thing) but do not change the quote tags or the brackets.
5. Write your message either BEFORE the {quote} tag or AFTER the {/quote} tag, and then submit.
6. Voila! Quoted message and reply!
I hope that helps clear it up. |
_________________
45, NW20, combination skin |
|
|
|
|
Sun May 14, 2006 7:01 am |
Ok, I have a question now too...how do you quote 2 people??? I've never been able to figure this out. Thanks!!!!!!!!  |
|
|
|
|
|
Sun May 14, 2006 12:33 pm |
Mabsy wrote:
I hope that helps clear it up.
Yes it does, thank you very much! |
|
|
Mabsy
Moderator
Joined: 17 Aug 2003
Posts: 9644
|
|
|
Sun May 14, 2006 10:01 pm |
| Lifeplyr01 wrote: |
| Ok, I have a question now too...how do you quote 2 people??? I've never been able to figure this out. Thanks!!!!!!!! |
As in from two separate posts? I use two windows for this. Click "quote" on both posts you want to quote and then copy the contents of one message writing box into the second and just use that one.
kls - you're most welcome |
_________________
45, NW20, combination skin |
|
|
|
|
Sun May 28, 2006 5:58 pm |
| Thanks for the help. Now I've got another question--how do you put a "box" around the quote? This time I'll assume that there may be others that want to know this too! |
|
|
Mabsy
Moderator
Joined: 17 Aug 2003
Posts: 9644
|
|
|
Sun May 28, 2006 10:04 pm |
| kls wrote: |
| Thanks for the help. Now I've got another question--how do you put a "box" around the quote? This time I'll assume that there may be others that want to know this too! |
The box is automatic - that's what happens when you use the quote tags |
|
|
|
|
| Fri Apr 26, 2024 8:07 pm |
If this is your first visit to the EDS Forums please take the time to register. Registration is required for you to post on the forums. Registration will also give you the ability to track messages of interest, send private messages to other users, participate in Gift Certificates draws and enjoy automatic discounts for shopping at our online store. Registration is free and takes just a few seconds to complete.
Click Here to join our community.
If you are already a registered member on the forums, please login to gain full access to the site. |
|
 |
|
